Schematic & Wiring Diagram

This is a schematic diagram of stereo audio amplifier for your car. The circuit is powered by a single IC TDA1553 with some external components, this IC will handle your stereo car audio system.

The TDA1553CQ is a monolithic integrated class-B output amplifier in a 13-lead plastic DIL-bent-SIL power package. It contains 2×22 W amplifiers in BTL configuration. The device is primarily developed for car radio applications.

The TDA1553CQ contains two identical amplifiers with differential input stages and can be used for bridge applications. The gain of each amplifier is fixed at 26 dB.

Special features of the device are:

3-state mode switch
· standby: low supply current (<100>

Loudspeaker protection
When a short-circuit to ground occurs, which forces a DC voltage across the loudspeaker of >= V, a built-in protection circuit becomes active and limits the DC voltage across the loudspeaker to <= V. Pin 12 detects the status of the protection circuit (e.g. for diagnostic purposes).

Short-circuit protection
If any output is short-circuited to ground during the standby mode, it becomes impossible to switch the circuit to the mute or operating condition. In this event the supply current will be limited to a few milliamps.

Download the TDA1553CQ datasheet

Component part list

R1 _____________ 1K
R2 _____________ 1M
R3 _____________ 22K
R4 _____________ 10K
R5 _____________ 180K
R6 _____________ 1R

IC1 ____________ LM1875

C1 _____________ 1uF 50V
C2,6 ___________ 100nF
C3 _____________ 22uF 63V
C4 _____________ 0.22uF
C7,5 ___________ 220uF 50V 

Miscellaneous:
Fuse holder & cover
2 amp fuses