Monday, June 14, 2010
Car Stereo Audio Amplifier with TDA1553CQ Circuit Diagram
This is a stereo audio amplifier for your car. The ambit is powered by a distinct IC TDA1553 with some alien components, this IC will handle your stereo car audio system.
The TDA1553CQ is a caked chip class-B achievement amplifier in a 13-lead artificial DIL-bent-SIL ability package. It contains 2×22 W amplifiers in BTL configuration. The accessory is primarily developed for car radio applications.
Special features of the device are:
3-state mode switch
· standby: low supply current (<100>
Loudspeaker protection
When a short-circuit to ground occurs, which forces a DC voltage across the loudspeaker of >= V, a built-in protection circuit becomes active and limits the DC voltage across the loudspeaker to <= V. Pin 12 detects the status of the protection circuit (e.g. for diagnostic purposes).
Short-circuit protection
If any output is short-circuited to ground during the standby mode, it becomes impossible to switch the circuit to the mute or operating condition. In this event the supply current will be limited to a few milliamps.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.