Schematic & Wiring Diagram

Guitar Control Circuit Diagram

Device purpose:

This preamplifier was advised as a stand-alone carriageable unit, advantageous to ascendancy the signals generated by guitar pick-ups, decidedly the acquaintance "bug" types activated to acoustic instruments. Obviously it can be acclimated with any blazon of apparatus and pick-up.

It appearance a -10dB, 0dB and +10dB pre-set ascribe selector to acclimatize ascribe sensitivity, in adjustment to cope with about any analeptic blazon and model. a actual continued array activity is ensured by the abundantly low accepted burning of this circuit, i.e. beneath than 800µA.

Circuit operation:

IC1A op-amp is alive as an inverting amplifier, accepting its accretion set by a three means about-face inserting altered amount resistors in alongside to R4. This ascribe date is followed by an alive three-band accent ascendancy date accepting accord accretion back controls are set in their centermost position and congenital about IC1B.

Audio VU Level Meter Circuit with LM324

The 1K resistors in the circuit are capital so that the LED's about-face on at altered audio levels. There is no acumen why you can't change these resistors, although annihilation aloft 5K may account some of the LED's to never about-face on. This ambit is calmly abundant with added op-amps, and is not bound to use with the LM324. Pretty abundant any op-amp will assignment as continued as you attending up the pinouts and accomplish abiding aggregate is appropriately connected.

The 33K resistor on the schematic is to accumulate the arresting ascribe to the ambit at a low level. It is absurd you will acquisition a 33K resistor, so the abutting you can get should do. The amount of this resistor may charge to be changed, so it is best you breadboard this ambit afore absolutely amalgam it on PCB. The ambit in it's accepted anatomy will acquire band akin inputs from sources such as the aux out on a Hi-Fi, all admitting could be calmly adapted to acquire apostle inputs.

The audio + is affiliated to the capital absolute rail, while the audio - is acclimated for arresting input. The 50k pot can be acclimated to alter the acuteness of the circuit.

Car Battery Charger 12Volt Circuit Diagram

The aloft circuit claimed accept adeptness to anticipate array blackmail that accomplish electrolyte absent due to evaporation. This ambit will annihilate the problems by ecology the battery’s action of allegation through its attendant ascendancy ambit by applying a aerial allegation accepted until the array is absolutely charged. Back charging is complete, it turns on the red LED (LD2) and deactivates the charging circuit.

This ambit is fatigued to allegation 12V batteries ONLY. Certain accent should be taken back base up this circuit. They are the access of the agent to the ambit board, and those bartering accepted to the array actuality charged. These access should be fabricated with cables accepting a ample cross-sectional breadth to anticipate voltage-drop and calefaction accession back accepted flows through them.

Audio Power Amplifier 170W with LM4651 & LM4652

The aggregate of the LM4651 disciplinarian IC and the LM4652 ability MOSFET Class D ability amplifier IC provides a aerial ability amplifier solution, acceptable for self-powered speakers, subwoofers and affection car boosters.

The LM 4651 is a absolutely chip accepted beating amplitude modulator (PWM) driver, absolute undervoltage, abbreviate circuit, overmodulation, and thermal abeyance aegis circuitry. The IC appearance a standby action which shuts bottomward the beating amplitude modulation, aspersing accumulation current.

The LM 4652 is a absolutely chip H-bridge Ability Mosfet IC in a TO220 ability package. The IC has a congenital in temperature sensor to active the LM4651 back the die temperature exceeds the beginning limit.

Used together, the LM4651 and LM4652 anatomy a simple, compact, efficient, aerial affection ability audio amplifier band-aid complete with protection, commonly apparent alone in Class AB amplifiers.

Odd Block KT88 Series 1 Tube Amp-Power Supply

A schematic of the ability accumulation is apparent below. Like the amplifier schematic, the ability accumulation ambit is © OddWatt Audio and permission to host the schematic on this armpit has been provided by OddWatt Audio. You are chargeless to use the schematic for personal, non-commercial use.

Mains ability enters the amplifier through an IEC atrium amid at the rear of the amp. The IEC atrium includes a 3 Ampere agglutinate and an EMI filter. The ability agent is an OEM bogus by Edcor with ratings of 180V-0-180V at 250 mA and 12V at 4A. Ability accumulation capacitors are Panasonic ECG alternation 500 volt electrolytic and Solen Polypropyene. The ample ability resistors are Vishay/Dale wire anguish and the actual resistors are carbon film. The High-Tension (HT) accumulation is rectified with STTH5 ultrafast aerial voltage rectifiers and uses CRC filtering. A 12V DC accumulation is acclimated for the tube heaters. An adjustable adjournment ambit is acclimated to adjournment the HT accumulation on ability up.

6 Watt Audio Amplifier Schematic Circuit with TDA1519

The audio amplifier circuit is on the TDA1519 amplifier IC that is based in audio applications, which is not a aerial achievement ability can be used. The ambit TDA1519 is a ability of 2×6 watts.

The TDA1519 is an amplifier congenital Class B dual-output advance in a 9-by-line (SIL) artificial amalgamation boilerplate achievement is primarily developed for car radio applications.

Key Features of the audio amplifier IC TDA1519 are: Requires few alien components, anchored gain, acceptable bounce drive, aphasiac / standby mode, thermal protection, about-face polarity safe. Tda1519 amplifier ability rating, 14.4 volts.

1.5V Amplified Ear Circuit Diagram

Device purpose:

This circuit, affiliated to 32 Ohm impedance mini-earphones, can ascertain actual alien sounds. Useful for theatre, cinema and address goers: every chat will be acutely heard. You can additionally accept to your television set at a actual low volume, alienated to bother ancestors and neighbors. Even if you accept a faultless hearing, you may ascertain abrupt sounds application this device: a alien bird twittering will assume actual abutting to you.

Circuit operation:

The affection of the ambit is a constant-volume ascendancy amplifier. All the signals picked-up by the microphone are amplified at a connected akin of about 1 Volt aiguille to peak. In this address actual low amplitude audio signals are awful amplified and aerial amplitude ones are limited. This operation is able by Q3, modifying the bent of Q1 (hence its AC gain) by agency of R2. A noteworthy affection of this ambit is 1.5V array operation. Typical accepted drawing: 7.5mA.

Notes:

• Due to the constant-volume control, some users may consider P1 volume control unnecessary. In most cases it can be omitted, connecting C6 to C3. In this case use a SPST slider or toggle switch as SW1.
• Please note the stereo output Jack socket (J1) connections: only the two inner connections are used, leaving open the external one. In this way the two earpieces are wired in series, allowing mono operation and optimum load impedance to Q4 (64 Ohm).
• Using suitable miniature components, this circuit can be enclosed in a very small box, provided by a clip and hanged on one's clothes or slipped into a pocket.
• Gary Pechon from Canada reported that the Amplified Ear is so sensitive that he can hear a whisper 7 meters across the room.
  
  He hooked a small relay coil to the input and was able to locate power lines in his wall. He was also able to hear the neighbor's stereo perfectly: he could pick up the signals sent to the speaker voice coil through a plaster wall.
  
  Gary suggests that this circuit could make also a good electronic stethoscope.

Simple Sound-to-Light Converter Schematic Diagram

Figure 1 shows a simple ambit for converting an audio arresting (such as one that comes from the apostle terminals of a CD player). The ambit basically consists of a buffer/amplifier date and three clarify circuits: a high-pass filter, a mid-pass filter, and a low-pass filter. The achievement of anniversary clarify ambit drives a light-emitting diode of altered color.

The ascribe arresting is fed to the absorber date through C1. The ethics of RF and RV1 should be called so that the absorber is able to drive the three filters absorbed to its output. The low-frequency, mid-frequency, and high-frequency apparatus of the ascribe arresting are alone accustomed to canyon through the low-pass clarify (bottom filter), the mid-pass clarify (middle filter), and the high-pass clarify (topmost filter), respectively, appropriately amid them from anniversary other.

Changes in the achievement of a clarify account its agnate achievement LED to about-face on and off. In effect, agriculture a connected audio arresting to the ascribe of this ambit causes the LED's to 'dance'.

Part list for 12 Amp BDX33-based power supply:

• 2 x 15 volt 6+ amps

• 2 times two MR750 (MR7510) diodes (MR750 = 6 Ampere diode) or 2 times 3 1N5401 (1N5408) diodes.

• F1 = 1 Amp

• F2 = 15 amp

• R1 2k2 1 Watt

• R2 10k

• R3 1k 0.5 watt

• R4,R5,R6,R7 0.1 ohm 10 watt

• R8 4.7

• R9 6k8

• C1 two times 4700uF/35v

• C2 330uF/35v

• C0',C3,C4,C6,C10 100nF

• C7 330uF/25v

• C8 47nF

• C9 47uF/25v

• D1 1N5401

• D2 LED

• D3, D4, D5 1N4001

• IC1 78L15

• relay 12 volt 2x5 amp switching

• 3 darlington transistors: T0,T1,T2 = BDX-33 NPN TO-220 transistor

• Zd 8 or 9 volt, 5 watt

• P1 2k trimmer

If using a bridge rectifier (like in schematic 2) you do not need 2 x 15 volts 6 amps, but 1 x 15 volt 10+ Amps

Part list for 20 Amp BDX33-based power supply:

• 2 x 15 volt 12+ amps

• 2 times 3 MR750 (MR7510) diodes (MR750 = 6 Ampere diode) or 2 times 5 1N5401 (1N5408) diodes.

• F1 = 2 Amp

• F2 = 25 amp

• R1 2k2 1 Watt

• R2 10k

• R3 1k 0.5 watt

• R4,R5,R6,R7 0.1 ohm 10 watt

• R8 4.7

• R9 6k8

• C1 22000uF/35v

• C2 330uF/35v

• C0',C3,C4,C6,C10 100nF

• C7 330uF/25v

• C8 47nF

• C9 47uF/25v

• D1 1N5401

• D2 LED

• D3, D4, D5 1N4001

• IC1 7815

• relay 12 volt 10 amp switching

• Four darlington transistors: T0,T1,T2,T3 = BDX-33 NPN TO-220 transistor

• Zd 8 or 9 volt, 5 watt

• P1 2k trimmer

If using a bridge rectifier (like in schematic 2) you do not need 2 x 15 volts 12 amps, but 1 x 15 volt 20 Amps